Tuesday, September 27, 2011

WBBA Event Special: Fang Leone W105R²F Burning Claw Ver.

New addition to the Limited Exclusive Bey Collection~


WBBA Event Special Exclusive: Fang Leone W105R²F Burning Claw Ver.


Contents Include:
Leone FaceBolt
Leone Clear Wheel
Fang 4D 2Tier Metal Wheel
Wing 105 Track
Right Rubber Flat Bottom
Stickers & Instructions
Tool


This Recolored Burnng Claw version of the Fang Leone is released in Japan as a Limited Shop Event Premium, simliar to the Bakushin Susanow Eclipse Ver. Recolored parts include a clear Red CW and a Metallic Red Fang 4D MW. In addition, the Fang Leone original 130 Track and W²D is replaced with W105 Track and R²F Bottom. The modification changes the Fang Leone into an aggressive Attack Type Bey configuration.


My personal favorite in this edition would be its Gold imprinted Leone FaceBolt. Since the original Fang Leone does not come with a printed FaceBolt, it sure adds to the collection well~


Overall, the WBBA Event Special Exclusive Fang Leone W105R²F Burning Claw Ver. is not a must have but its definately a very nicely recolored rendition of the original. Do not forsee using it in any battles thou. lol

BB-118 Phantom Orion B:D

The long awaited "bearing system" is finally re-invented~!


BB-118 Phantom Orion Bearing Drive (B:D)
The Phantom Orion B:D is the Only 4D bey that uses a Ball Bearing Shaft in its Fusion Track/Bottom.


Contents Includes:
FaceBolt (Blank)
Orion Clear Wheel
Phantom 4D Metal Wheel
Bearing Drive 4D Fusion Track/Bottom
Light Launcher 2 (Black) with Rip Cord
Stickers & Instructions
Tool


The Phantom 4D Metal Wheel consist of a 2 piece system that allows the Metal Wheel ring to flip between 2 modes:


The Stamina Mode
Only revealing its gradual slope surface, the Phantom in Stamina Mode minimises critical friction between Metal Wheels during a battle. Spin ratio damage minimised = Stamina Up!


The Attack Mode 
In Attack Mode, the Phantom MW inverts into a Jaggered surfaced form that inflicts damage to the opponent upon contact. Stamina Mode surface allows Smash Attack to lower opponents.


The Phantom MW is also the Only Metal Wheel that has a full External Weight Distribution design. This means that All the weight of the MW is concentrated only in the outer circumference of the MW, similiar to the Scythe MW but better in performance.


The long awaited part in the history of beyblades is finally here, the Bearing Drive!


The B:D is basically a Free Spinning WD but with a Ball Bearing Core is in the shaft to minimise surface friction that will reduce much needed stamina in a battle. The Bearing Drive also ables the Phantom Orion to recover from attacks with minimum spin ratio loss by absorbing its damage into its free spinning WD bottom.


Trial Tests
To test the Stamina Capabilites of the Phantom Orion B:D, the bey is put thru a stamina test in a standard attack stadium and timed. Results are as follows:
Test 1 - 4mins 23seconds
Test 2 - 5mins 12seconds
Test 3 - 6mins 59seconds


The best timing recieved was only 6mins 59seconds, yes it is pretty long out of the box but i have seen better reviews with 8minute to 9minute results.


During the trial, a ratttle sound was noted, it is caused by the wobbling of the inner shaft. To make things worst the top end of the Bearing Drive is a Flat Contact Surface that actually comes in contact with the inner shaft surface degrading its free spinning ratio greatly. Since modifications are NOT allowed in bey competitions, the only option is to season the part as much as one could. But that will also means launching the bey many times and the constant impact to the bearing might damage the part before you even season it...so how to one season  the bearing effectively without damaging the part?

So here is the "How To" section that many fellow bladers have been asking.


First prepare a small strip of cardboard, some blutack and your B:D.


Cut 2 small slits 1/3 into the center of the strip of cardboard and fold to create a "Fin".
Yes, we are basically making a propeller that uses wind power to drive the bearing to turn.



Next attach the fin to the B:D by using the Blutack.


Attach new B:D wind propeller near a fan or wind source and its done. Just leave the part to 'season' for a day or so before applying a drop of mineral oil and repeat process till you are satisfied with the results.


Overall the Phantom Orion B:D is without a doubt the best designed 4D bey with the most longest stamina. Although there are some setbacks on the Bearing Drive System, it can be retified with some 'seasoning'. Since the Phantom Orion is the Only Bey with a Ball Bearing system, it makes this bey a must have to any blader and collector. So get yours today ya~